2011 — 2016
4.4L V8 Twin-Turbo (S63) - First turbocharged M5
Petrol
While driving at low speeds, gently apply the brakes to check for any vibrations or pulsing, as the F10 M5 has large front rotors that can be prone to warping if subjected to heavy track use.
Before starting the engine, listen closely to the cold start; a metallic rattling from the top end could potentially indicate that the timing chain tensioners or guides might require inspection soon.
While in Sport+ mode during light acceleration, feel for any hesitation or surging, as the S63 engine's fuel injectors can sometimes show signs of uneven wear which impacts smooth power delivery.
Check this by cycling through the M-Drive settings while stationary; ensure the steering, suspension, and throttle response adjust immediately, as any failure here can point to deeper electronic control unit connectivity concerns.
Usually marks the interval where initial spark plug and ignition coil service is recommended to maintain peak twin-turbo efficiency.
A common point where cooling system components, such as plastic coolant hoses and expansion tanks, may begin to show signs of brittle aging due to the high under-bonnet heat.
The typical window for considering a professional intake carbon cleaning service to remove deposit buildup from the direct injection ports.
Prioritize oil changes every 7,500km rather than relying solely on the extended factory service intervals to keep the twin-turbo bearings in top condition.
Ensure the dual-clutch transmission (DCT) fluid and filter are replaced according to schedule to maintain smooth gear changes.
Keep a close eye on the coolant levels, as these engines run quite hot and benefit from a well-maintained cooling system.
Regularly inspect the condition of the engine and transmission mounts, which can soften over time and affect the vehicle's driving precision.
Use high-quality 98 octane fuel consistently to prevent pre-ignition and ensure the engine management system operates optimally.
Estimated repair costs if issues arise
Due to the extreme heat generated by the S63 engine, the rubber and plastic components in the engine bay can perish over time. It is wise to consider these as a potential maintenance item if you notice small drips or burning smells.
The M5 is a heavy, high-performance machine. When it comes time to refresh the brakes, sticking to OEM or high-quality equivalent parts is recommended for safety, though they do sit at a premium price point.
If you notice the engine running slightly rough at idle or poor fuel economy, it may eventually be worth checking the fuel injectors. If they require replacement, it is often best practice to address them as a full set to ensure consistent performance.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer