2022 — 2026
976cc Rotax V-Twin (Detuned) - Efficient mid-range
Petrol
Engage the selectable 4WD system on a loose surface and listen for any clunking or hesitation when the Visco-Lok differential locks in.
With the engine at operating temperature, perform a slow-speed crawl to observe if the CVT belt exhibits any 'chatter' or slipping under low-RPM load.
Check the front suspension ball joints by rocking the steering back and forth while stationary; listen for any play or mechanical ticking.
Operate the gear selector through all positions (P-R-N-H-L) while idling to ensure each gear engages smoothly without grinding or resistance.
Initial break-in service and primary fluid flush.
Driveline inspection, belt wear assessment, and suspension bushing check.
Major service point involving spark plugs, cooling system flush, and clutch housing maintenance.
Check your engine oil level regularly, as these V-Twins enjoy working hard and appreciate a top-up between long intervals.
Inspect the intake air filter after every dusty ride; keeping this clean is the best way to extend the life of your Rotax engine.
Keep a close eye on the CV boot covers for any signs of grease spray, which can indicate a small tear that might be worth addressing early.
Give the radiator a gentle wash-down if you've been in the mud, as a clean core helps keep the engine temp steady in the NZ summer.
Check your coolant levels periodically to ensure the cooling system is free of air pockets.
Estimated repair costs if issues arise
Depending on the intensity of your usage, the belt is a wear item. If you feel a loss of power or slipping, it is wise to budget for a replacement to prevent belt debris from causing further issues.
After significant off-road use, bushings may develop play. If the steering feels a bit vague or you notice clunks over bumps, you might eventually need to budget for a full suspension bushing kit.
In machines with higher hours, it is common to consider the water pump seals. If you notice coolant weeping from the weep hole, it is worth planning for a professional replacement to protect the engine internals.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer