2010 — 2026
Mercedes-Benz OM 502 LA - 390kW (530hp) 6-axle Long Boom All-Terrain Crane
Diesel
Test Drive Task: Cycle the boom extension and retraction under load. | Observation: Listen for any irregular hydraulic chatter or uneven movement, as the long-boom cylinder seals on the GMK6300L can occasionally show their age through internal bypass or slight weeping.
Test Drive Task: Observe the transmission shifting patterns while under moderate load. | Observation: Ensure the gearbox transitions smoothly through the lower gears, as these high-torque Mercedes-Benz drivetrains benefit from precise calibration to handle the substantial weight of the 6-axle carrier.
Test Drive Task: Engage the steering modes across all axles while stationary. | Observation: Verify that all steering actuators respond without hesitation, as the complex electronic steering control system is vital for manoeuvring this large unit safely on tight job sites.
Test Drive Task: Perform a cold start and monitor the exhaust colour. | Observation: Watch for excessive smoke or uneven idling during the initial warm-up, which can sometimes indicate that the fuel injection system or the EGR components may require a tune-up for optimal performance.
Comprehensive hydraulic fluid analysis and filter replacement.
Full carrier engine service including valve clearance checks and coolant flush.
Periodic structural inspection of the main boom and outrigger pads for fatigue as per manufacturer specifications.
Regularly grease all lubrication points on the outriggers and slewing ring to ensure smooth rotation.
Monitor the engine oil levels in both the carrier and superstructure engines, ensuring they are topped up with the correct specification lubricant.
Conduct a visual check of all hydraulic lines and hoses for signs of abrasion or weather-related cracking.
Clean and protect all electrical connectors on the crane’s superstructure to maintain reliable signal transmission for load sensors.
Check tyre pressures and tread depth across all 12 wheels to ensure even wear and road safety compliance.
Estimated repair costs if issues arise
If the crane struggles to maintain pressure under load, you might eventually need to budget for a pump overhaul or replacement to ensure operational safety.
Given the sophisticated electronics, if the system triggers a warning light, it is wise to consider that a diagnostic session or component replacement might be needed for the computer systems.
In machines of this scale, the suspension system works very hard; you may want to set aside funds for potential seal replacements on the hydraulic cylinders to prevent leaks.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer