2017 — 2021
2.0L (GW4C20A) Petrol - Elite/Ultra trim
Petrol
During the test drive, shift the transmission through all gears while stationary and under load to listen for any hesitation or clunking, as these gearboxes can show wear in the solenoids on higher-mileage examples.
Carefully inspecting the sunroof seals and headliner for signs of moisture or water staining; early Haval sunroof drains have been known to clog, which can cause dampness in the cabin if not maintained.
When navigating a bumpy road, listen closely for rattles or clunks from the front suspension bushings, as the H9’s heavy chassis can accelerate wear on control arm bushes over time.
Cycling through the various 4WD modes and locking functions on a loose surface to ensure the transfer case engages smoothly without any error messages appearing on the dashboard display.
Time to inspect timing chain tensioners and ensure the engine oil has been strictly maintained to prevent varnish buildup.
Recommended interval for a full transmission fluid flush and filter change to preserve the longevity of the ZF-sourced gearbox.
Consider a proactive assessment of the suspension struts and bushings to maintain that factory-fresh ride comfort.
Ensure the oil service history is documented every 10,000km; the GW4C20A engine performs best with high-quality synthetic lubricants.
Check that the cooling system has been bled properly, as air pockets can occasionally hide in these complex radiator layouts.
Verify that all infotainment software has been updated to the latest available version to improve system stability.
Inspect the turbocharger intake pipes for any signs of oil seepage or cracking in the rubber connectors.
Confirm the air conditioning compressor is cycling correctly, as it is a hardworking component in the NZ climate.
Estimated repair costs if issues arise
While reliable, the chain is a high-load component. If the engine develops a slight rattle upon cold startup in the future, you should plan to have a specialist check the tensioner's slack.
Regular fluid changes are the best preventative measure. If shifting becomes less crisp over time, a full service can restore performance, though internal repairs are more involved.
Depending on the driving conditions the vehicle has faced, rubber bushings may eventually perish. Budgeting for a suspension refresh can breathe new life into the car's handling.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer