2013 — 2016
350cc (FE 350) - Mid-range Enduro
Petrol
Observe the cold-start behavior; listen for any distinct 'clacking' from the top end, as these engines are high-performance units that appreciate a well-documented service history.
Carefully inspect the underside of the engine casing and the rear suspension linkage for signs of heavy rock strikes or significant frame wear indicative of competition use.
While idling in neutral, check for consistent throttle response and ensure there is no excessive hesitation or 'stumble' which could suggest a fuel injector or mapping quirk.
Check the condition of the electrical connectors and wiring harness around the headstock; ensure the dash display operates correctly without flickering, as these can sometimes suffer from water ingress.
Typical break-in period completed; verify oil and filter changes have been performed at very short intervals.
Often the mark where a top-end refresh is considered for competitive riders to maintain optimal compression.
A point where a full bottom-end inspection and chassis bearing service are common in the NZ enduro community.
Check the air filter cleanliness; a pristine filter is the best way to extend the life of these high-revving engines.
Inspect the coolant levels and radiator condition to ensure the cooling system is running at peak efficiency for our variable Kiwi weather.
Verify the chain and sprocket condition, ensuring they are free of excessive 'shark-fin' wear.
Check all structural bolts, particularly those around the engine mounts and swingarm, as vibration can loosen these over time.
Inspect the fork seals and shock shaft for any weeping oil to ensure your suspension remains plush and responsive.
Estimated repair costs if issues arise
If the bike has been used for serious competition, you might eventually need to budget for a piston and ring replacement to keep the engine performing as intended.
Given our varied terrain, suspension seals and oil degradation occur; setting aside funds for a professional rebuild ensures your handling stays sharp.
To ensure reliable running, it's wise to consider the potential future need for a fuel system clean or pump check if you notice any inconsistent fueling.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer