
2018 — 2022
2.0L P400e Plug-in Hybrid - AWD
Hybrid
Check the transition between electric and combustion power while accelerating onto the motorway. | Note: Ensure the handover between the P400e's electric motor and the 2.0L Ingenium engine feels seamless; any jerky hesitation might suggest the hybrid control module or engine mounts need a software calibration or inspection.
Listen for any clunking sounds from the suspension while traversing speed bumps. | Note: The air suspension system is a highlight of the ride quality, but in cars of this age, it is worth monitoring for uneven ride heights or noisy compressor operation which can hint at leaking air bags or worn control arm bushings.
Operate the infotainment and terrain response systems thoroughly while parked. | Note: The dual-screen 'Touch Pro Duo' system is quite feature-heavy; verify that every menu loads without lag, as internal hard drive wear or software glitches can occasionally occur.
Check the brakes for any grinding or pulsing sensations when coming to a gentle stop. | Note: Because the P400e uses regenerative braking to assist with slowing down, the physical brake pads and rotors may wear differently than a standard petrol model, so ensure the system feels consistent and responsive.
Usually marks a time to inspect suspension components and verify the integrity of the high-voltage battery charging port seal.
Consider a full transmission and differential fluid flush to maintain long-term smoothness of the AWD system.
Typically the interval for a deep inspection of cooling hoses and the auxiliary battery system that supports the vehicle's electrical suite.
Verify the full service history is documented, ideally by a Land Rover specialist or authorized centre.
Ensure the charging cable and domestic plug adapter are present and in good physical condition.
Confirm the air suspension raises and lowers the vehicle through all height settings without error lights.
Check for any signs of water dampness in the boot area or footwells to rule out potential sunroof drain blockages.
Inspect the coolant reservoir for any signs of sediment or discolouration, which is a good practice for turbocharged engines.
Estimated repair costs if issues arise
While the ride is legendary, the air suspension components are complex. If this component needs attention in the future, it involves replacing the compressor or individual air springs to restore the factory-smooth ride.
As with any plug-in hybrid, you might eventually need to budget for a specialized diagnostic assessment or cell balancing service to ensure you are getting the most out of your electric-only range.
To keep the AWD system performing at its best, it is wise to set aside funds for a complete fluid service, which helps protect the delicate internal gears from long-term wear.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer