2017 — 2026
2.5L (PY-VPS) - Limited/Takami AWD
Petrol
During low-speed maneuvering, listen for any light clicking sounds from the front end, as the front suspension lower control arm bushings can occasionally show wear in high-mileage examples.
Check the infotainment system by toggling through the Mazda Connect menus while stationary, ensuring the rotary commander dial responds promptly without skipping or lagging.
While driving on an open road, observe the head-up display brightness and clarity to ensure there is no ghosting or flickering, which can sometimes occur with the projection unit over time.
Before starting the engine, check the interior leather seating surfaces for signs of cracking or stretching, as the side bolsters on the Limited/Takami trim benefit from regular conditioning to maintain their supple texture.
Consider a proactive transmission fluid flush, even though Mazda suggests it is 'sealed for life', as it helps maintain smooth shifts.
The spark plugs are due for replacement; using the correct NGK iridium-tipped plugs ensures optimal fuel efficiency and ignition timing.
Check the serpentine belt for signs of cracking or fraying to prevent unexpected cooling system issues.
Verify that the service history shows regular oil changes using the correct 0W-20 synthetic oil to keep the Skyactiv engine running at its best.
Inspect the condition of the brake rotors and pads, as these are heavy vehicles and the components work hard in stop-start city traffic.
Ensure the battery is healthy, as the i-stop feature relies on a high-performing battery to function correctly.
Check for any signs of water pooling in the spare wheel well, ensuring the rear hatch seals are performing their job correctly.
Confirm the air conditioning system is blowing ice-cold, which is a great way to ensure the cabin filter has been replaced regularly.
Estimated repair costs if issues arise
If you notice a slight 'clunk' when going over bumps, these bushings may need replacing. It is common to consider replacing the whole arm assembly to ensure a refreshed ride feel.
If the screen begins to 'ghost touch' or flicker, it may require a replacement of the touchscreen digitizer or the main control module. It is worth keeping a small buffer for this electronics update.
While rare, some higher-mileage examples might show a light weep around the transfer case. It is sensible to have a mechanic inspect the underside during a pre-purchase check.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer