
2013 — 2019
OM 471 - 12.8L Inline-6 (330kW)
Diesel
Test the Powershift 3 automated manual transmission through stop-start traffic. | Description: While driving, observe for any hesitant or jerky gear changes, as smooth operation is key to the longevity of the clutch actuator.
Examine the AdBlue/SCR system integration during a cold start. | Description: Check this by monitoring the dashboard for any persistent warning lights or derating notifications which may indicate an issue with the dosing module or sensors.
Inspect the air suspension and leveling valves under load. | Description: Check this by observing the vehicle's height from the cab; if the vehicle struggles to maintain a level stance, the height control valves may be showing signs of wear.
Review the history of the OM 471 cooling system. | Description: While the engine is at operating temperature, monitor the gauge to ensure it stays rock solid; fluctuations can sometimes suggest the early stages of water pump fatigue.
Usually marks the point where auxiliary drive belts and tensioners should be inspected for wear.
A common interval to reassess the condition of the turbocharger and exhaust gas recirculation (EGR) valve components.
Typically the stage where a major service audit is recommended, focusing on injector health and deep-level transmission calibration.
Prioritise regular engine oil and genuine filter changes to protect the high-pressure fuel injection system.
Keep a close eye on the chassis grease points; keeping them well-lubricated significantly extends the life of the steering linkages.
Ensure the cab air filtration is cleaned frequently to protect the internal HVAC system from NZ's rural dust.
Regularly drain the air system tanks to prevent moisture buildup which can corrode sensitive electronic valves.
Perform a computer diagnostic scan at every major service to keep the ECU and transmission modules updated.
Estimated repair costs if issues arise
Future Budget Planning: Depending on the nature of the work the vehicle performed, the clutch assembly is a wear-and-tear item. It is wise to have funds set aside as the vehicle nears higher mileage cycles.
Future Budget Planning: These complex emissions systems are sensitive to NZ's varying fuel quality over time. You might eventually need to budget for sensor replacements or pump maintenance to keep the system compliant.
Future Budget Planning: To maintain the efficiency of the OM 471 engine, the high-pressure injectors may require servicing or replacement as the vehicle ages to ensure optimal fuel economy.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer