2014 — 2021
2.5L (QR25DE) - AWD flagship petrol
Petrol
While accelerating steadily between 40-60km/h, pay close attention to the transmission; if you feel a stutter or rubber-band sensation, it is worth asking a mechanic to assess the CVT fluid health.
Check the climate control by setting it to the lowest temperature; ensure the A/C compressor engages and blows cold air, as these units can occasionally develop leaks in the condenser over time.
Before starting the engine, turn the key to the 'on' position and confirm the dashboard warning lights illuminate, then disappear after starting, specifically checking for any lingering 4WD or ABS warning indicators.
In a safe, quiet area, perform a full-lock turn at slow speeds; listen for any clicking or binding sounds from the front end, which can indicate the condition of the CV joints.
Consider a full transmission service (CVT fluid exchange) and inspection of the spark plugs.
It is often a good time to evaluate the condition of the suspension bushings and engine mounts.
Check the drive belts and tensioner health, as these are common items to refresh as part of long-term ownership.
Change the engine oil and filter every 10,000km to keep the 2.5L engine running smoothly.
Monitor the CVT fluid condition; keeping this fresh is the single best way to prolong the life of the transmission.
Check your brake fluid and coolant levels during your regular top-up routine to ensure all seals stay happy.
Keep an eye on your tyre tread wear to ensure the AWD system operates with consistent grip levels.
Periodically inspect the cabin air filter to keep the airflow in the cabin fresh and clear.
Estimated repair costs if issues arise
Regular fluid exchanges are key for these transmissions. If this component needs attention in the future or requires a professional fluid flush, the estimated cost in NZ is usually reflective of specialist labor.
After years on New Zealand's varied roads, the rubber bushings may naturally wear. Depending on the car's history, you might eventually need to budget for a refresh of the front control arm bushings.
If you notice a squeal on cold mornings, it is common to consider replacing these components. It is a standard maintenance item that helps prevent charging or cooling issues.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer