2000 — 2002
2.0L I4 HDi (DW10TD)
Diesel
Drive over speed bumps and listen for metallic clicking or squeaking from the rear. | Note: Rear axle trailing arm bearings are a major weak point; if neglected, the entire rear beam requires a costly rebuild or replacement.
Operate all windows, central locking, and mirrors while opening and closing the front doors. | Note: The wiring looms in the door bellows are prone to cracking and fatigue, leading to intermittent electrical failures.
Apply full throttle in third gear from 1500rpm and check the rearview mirror for excessive black smoke. | Note: The DW10TD HDi engine can suffer from clogged EGR valves or MAF sensor failure, causing power loss and emissions issues.
Check the front passenger and driver footwells for dampness or the smell of antifreeze. | Note: Heater matrix leaks are common and require a full dashboard removal to repair, which is labor-intensive.
Standard oil and filter change using high-quality synthetic 5W-40; inspect brake pad wear.
Replace fuel filter and air filter; inspect front suspension bushes and drop links for play.
Critical timing belt (cambelt) and water pump replacement; inspect rear axle geometry for negative camber.
Verify the condition of the crankshaft pulley (harmonic balancer) for rubber perishing.
Inspect the fuel pressure regulator for debris, as the HDi system is sensitive to fuel quality.
Check all cooling system hoses for swelling or signs of aging to prevent overheating.
Lubricate the spare wheel carrier mechanism to ensure it isn't seized for roadside emergencies.
Clean the EGR valve every 40,000km to maintain fuel efficiency and prevent limp mode.
Estimated repair costs if issues arise
Necessary if wheels are 'cambered out' or scrubbing inner arches.
Must be done every 100,000km or 10 years to avoid total engine failure.
Standard wear item; labor-intensive due to the subframe proximity.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer