2021 — 2026
100kW Electric Motor (EM10)
Electric
Execute repetitive low-speed maneuvers while monitoring the infotainment screen response and camera lag. | Note: The PSA-sourced head units can suffer from software freezes or delayed reversing camera activation, which is critical for van safety in NZ work zones.
Cycle through Drive and B-mode (Regenerative Braking) on a downhill stretch. | Note: Ensure the transition between mechanical and regenerative braking is seamless; any 'grabbiness' could indicate a vacuum pump or software calibration issue.
Listen for suspension 'thumps' or 'clicks' over speed bumps at 20-30km/h. | Note: The extra weight of the 50kWh battery puts significant stress on front strut top mounts and sway bar links, common wear items on the EMP2 platform.
Plug into a Type 2 AC charger and verify the locking mechanism engages/disengages immediately. | Note: The actuator for the charging flap lock can occasionally seize, preventing charging or cable removal, which is a known nuisance for early e-Partner units.
Initial inspection of high-voltage cabling for chafing, replacement of pollen filters, and brake fluid moisture content check.
Comprehensive State of Health (SOH) battery report, inspection of the reduction gear oil, and replacement of the cabin HEPA filter.
Replacement of the battery thermal management coolant (critical for cell longevity) and inspection of drive shaft boots and suspension bushings.
Verify the battery coolant level and concentration (requires specialized dielectric fluid).
Inspect tire tread depth and alignment; the high torque of the 100kW motor accelerates front-tire wear.
Check brake discs for surface oxidation; lack of use due to regen-braking can cause premature corrosion in NZ's coastal air.
Run a diagnostic scan for EV-specific fault codes related to the On-Board Charger (OBC).
Lubricate the sliding side-door tracks and check the weather seals for structural integrity.
Estimated repair costs if issues arise
High-torque delivery requires Load Index rated tires with low rolling resistance.
Out-of-warranty replacement if AC charging fails; ensure software is updated to prevent surges.
Bi-annual requirement to prevent moisture buildup in the hydraulic system.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer