2016 — 2017
75kWh Electric Motor - RWD
Electric
Navigate to a quiet area and slowly cycle the air suspension through its full height range to ensure there are no audible clicking sounds or error messages on the dash.
Check the door handles by locking and unlocking the vehicle multiple times; observe if any handle hesitates to extend or retract fully, as this mechanism can wear with age.
Perform a gentle acceleration test on a straight road to confirm the power delivery is smooth, keeping an eye out for any unusual vibrations in the drivetrain which could indicate half-shaft wear.
Inspect the infotainment screen while parked; look for 'yellowing' or 'bleeding' around the edges of the bezel, which is a known cosmetic concern in earlier facelifts.
Consider having the drive unit fluid inspected and checking the status of the cabin air filter.
This is a good time to evaluate the health of the suspension bushings and control arms, as they may begin to show signs of fatigue.
Monitor the high-voltage battery degradation trends via the onboard settings and consider a full professional inspection of the thermal management cooling system.
Regularly rotate your tyres, as the Model S is quite heavy and can wear through rubber slightly faster than a traditional combustion vehicle.
Keep an eye on the brake fluid levels; although regenerative braking does most of the heavy lifting, fluid health remains vital for safety.
Wipe down the door seals with a silicone-based protectant periodically to help keep them supple and prevent wind noise.
Ensure your 12V auxiliary battery is tested during your annual check-up, as it powers the car's computers and can occasionally fail without much warning.
Check your cabin air filter annually, especially if you drive in high-pollen areas of New Zealand, to keep the interior air quality crisp.
Estimated repair costs if issues arise
In cars of this age, the air struts and compressor may eventually require maintenance. If you notice the car sitting unevenly while parked, it's worth having a technician check the system.
Depending on the car's history, the internal gears or microswitches in the handles may need replacing. Planning for this keeps your entry smooth and reliable.
If this component needs attention in the future, it is a routine task. It is common to replace this every 3-4 years to ensure the car’s electronics remain stable.
Noticed something inaccurate or missing?Suggest an edit→
Disclaimer: This report is generated with the assistance of AI analysis based on verified automotive data. While we strive for 100% accuracy, enthusiasts should always conduct physical inspections and consult service records. View Full Disclaimer